Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 261)

KAYENNE K-FRAME — User Manual 261
Control Panel Overview
Device Control Functionality
The Device Control Module supports the following functionality:
• Run control:
• Play,
• Cue,
• Stop/Pause,
• Jog +/-,
• Fast Forward, Rewind,
• Variable speed play,
• Mark in/out,
• Loops,
• Library of cues (Q-MEM),
• Record, and
• Ganging.
Device Control Module Organization
The Device Control Module is organized as follows ( Figure 144 ):
• Device Select button group (buttons A-F), located at the top-left of the
Device Control Module, has six buttons labeled
A-F . These buttons select
devices for control by the Device Control Module and when selected,
show status for that device in the Status Display (top-left).
• Status Display, located top-middle-right (right of the Device Select
button group),
• Run Control button group (with Cue button), located middle-right (just
below the status display),
• The two soft knobs (Knob 1 and Knob 2), at the far right of the Device
Control Module (right of status display), are:
• Knob 1, Device select knob (top)—turn to scroll through and dele-
gate devices, and
• Knob 2, Clip select knob (bottom)—turn to scroll through and select
clips (parameters for both knobs are shown on the right in the status
display.),