Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 421)

KAYENNE K-FRAME — User Manual 421
ClipStore
as a background or keyer, the clip loaded into the CS-1 channel will play
automatically when the
Auto Start button is on.
You can loop a clip by touching the Loop button (highlights green) or mute
the audio of each channel individually with the Audio Mute button
( Figure 258 ).
Other controls include ( Figure 258 ):
• Timecode data pad—Touch the Timecode data pad to enter a timecode.
• Mark In / Mark Out buttons and data pads—Touch the Mark In / Mark Out
buttons to set the mark-in/mark-out to the current clip position, touch
the data pads to enter a Mark In or Mark Out point on a numeric
keypad.
• Cue to In button data pad—Touch the Cue to In data pad and enter the
value.
• Var Play Speed button and data pad— Var Play Speed button on, enables
variable speed play. Touch the data pad to enter the playback speed
value.
Device control buttons:
• Rewind
• Fast Forward
• Start of Clip
• Reverse Play
• Stop
• Play
• End of Clip
(The KF Trigs button is described in Replay with E-MEMs .)
Note All the functions listed above can be controlled by macros.