8 dc power input socket, 9 dc power and tally output socket, 10 script light power supply socket – Grass Valley LDK 8000 v.2.0 User Manual
Page 103
v2.0
LDK 8000 User’s Guide | Connectors
7-7
7.2.8
DC power input socket
Caution
The input voltage must not exceed +17 Vdc.
Figure 7-13. DC power input connector
7.2.9
DC power and tally output socket
Figure 7-14. DC power and tally output connector
7.2.10
Script light power supply socket
Figure 7-15. Script light power supply output connector
4
1
2
3
1.
Ground
2.
Ground (internally bridged to pin 1)
3.
+11.5 Vdc . . . +17 Vdc (internally bridged to pin 4)
4.
+11.5 Vdc . . . +17 Vdc
This socket accepts a DC voltage of 15V nominal.
XLR 4-pin male: panel view (X101)
4
1
2
3
1.
Ground
2.
On air
3.
No connection
4.
+12 Vdc (max. 18W)
Shield of cable directly to the connector housing.
The socket provides access to an internal tally switch.
When the camera is on-air, the contact of the internal
relay is closed.
Hirose 4-pole female: panel view
3
1
2
1.
+12 Vdc (maximum dissipation 3W)
2.
Power return
3.
Shield
Fischer 3-pole female: panel view (X111)