Grass Valley Maestro Master Control v.1.7 User Manual
Page 196
192
Maestro Channel Branding User Guide
Section 5 — The Maestro Configuration Editor
Wipe
The preferred transitional wipe effect name is selected from the drop-down
list box. This parameter applies to the video signal only and is not active for
audio signals.
Note
Wipes are represented graphically as a cross-fade in the video signal.
‘From Old’ Delay Duration
The delay period, expressed as a number of frames, from the time the tran-
sition begins (with a press of the
TAKE
button or via automation) until the
transition of the indicated signal begins. In the example in
, there
is a 20 frame delay after the transition is initiated before the video signal
begins to transition from the old to the new source. This allows the audio
transition to complete before the video transition begins.
If CrossFade or Wipe is the selected transition type for a video signal, this
field is disabled (grayed out) as it is not applicable.
If CrossFade is the selected transition type for an audio signal, this field is
disabled (grayed out) as it is not applicable.
‘From Old’ Duration
If a FadeFade type was selected, this is the number of frames in which the
old source will fade to black for a video signal or fade to silent for an audio
signal.
If CrossFade or Wipe is the selected transition type for a video signal, this
field is disabled (grayed out) as it is not applicable.
If CrossFade is the selected transition type for an audio signal, this field is
disabled (grayed out) as it is not applicable.
Black (Silent) Duration
If a FadeFade type is selected, this is the number of frames for which a
video signal will remain at black or an audio signal will remain silent before
the new source begins to fade in.
If CrossFade or Wipe is the selected transition type for a video signal, this
field is disabled (grayed out) as it is not applicable.
If CrossFade is the selected transition type for an audio signal, this field is
disabled (grayed out) as it is not applicable.
‘To New’ Delay Duration
If Wipe is the selected video type or CrossFade is the selected video or
audio type, this is the number of frames of delay after the transition begins
before the transition to the new source begins.
If FadeFade is the selected video or audio type, this field is disabled (grayed
out) as it is not applicable.