Grass Valley Maestro Master Control v.1.7 - Manual (Page 97)

Maestro — Channel Branding User Guide 93
Branding Element Visual Tool
Figure 67. Branding Visual Tool - Layout Button
Change the Position (%) settings as needed. These setting will change the
position of the banner, which is green in the example above (
Figure 67 ).
You can also drag the edges of the banner to adjust its width and height.
Click the banner and then place the cursor on a corner of the banner and
move the banner to the preferred size and location. The Position and Size
parameters display will then be updated to reflect the dragged banner
edge.
Note The Text crawl features should be restrained within the SAFE TITLE area.
2. Click the Enable shadow check box if you want to add a shadow to the
text.
3. Enter the number of pixels that you want to move the shadow
horizontally in the Dx (pixels) field.
4. Enter the number of pixels that you want to move the shadow vertically
in the Dy (pixels) field.
Note Negative numbers cannot be entered in either the Dx (pixels) or the Dy
(pixels) field.