Grass Valley Profile Family 18GB Disk Drive Upgrade - Manual (Page 15)

Installation Procedure Summary
18GB Disk Drive Upgrade 15
Five or more I am adding the
Slave Disk
Recorder board
Upgrade Installing Disk Drives (SCSI Cable
Pre-installed):
1. Add the Slave Disk Recorder board
b
.
2. Install the new disks.
3. Create a new file system and test.
18
Four or less I am adding the
Slave Disk
Recorder board
Upgrade Installing the SCSI Cable and Disk Drives:
1. Add the Slave Disk Recorder board
b
.
2. Install the new SCSI cable between the Slave
Disk Recorder board SCSI C connector and
the SCSI Backplane board.
3. Install the new disks.
4. Create a new file system and test.
25
a. Refer to rear panel labeling to determine if a Slave Disk Recorder board is installed.
b. Install the Slave Disk Recorder Board using the instructions in the Slave EDR Upgrade Installa-
tion manual.
Table 1. Summary of Installation Procedures (Continued)
Number of
Disks Already
In Your
System Is a Slave Disk
Recorder Board
Installed?
a
Procedure To Use Procedure
Page
Number