Grass Valley Profile XP Service Manual - Manual (Page 143)

Configuring actions and notifications
23 July 2004 Profile XP Service Manual 143
Playing a beep
This section documents NetCentral II Lite. For NetCentral III Lite click Help | Help
Topics to view similar documentation.
When you add the Beep action, NetCentral Lite automatically plays a beep on the
monitoring station PC. By setting the tone and duration of the beep you can create
audible alerts that are distinguishable as either an alarm or a warning.
In order to configure properties and add this action, you do not need to make any
special preparations, since NetCentral Lite uses the monitoring station PCs built-in
beep sound.
To configure properties for playing a beep
1. Choose Configure | Actions or Actions | Set Actions , create a rule for the Beep
action, and click the Add to List button as explained in “To add an action” on
page 138. The Beep Configuration dialog box appears.
2. Adjust the sliders for tone and duration to create an identifiable sound.
3. Click the Test button to hear a test of the sound that you have created.
4. When you are satisfied with your settings, click the OK button to close the dialog
box and save your settings.