Grass Valley STORM 3G - Manual (Page 26)

Section  ― Hardware Setting
26 STORM 3G ― Setup Guide
Audio output
Specification of audio cable (4pin-4pin) is:
Red: Right channel (R)
White: Left channel (L)
Black: Ground (G)
Audio cable (4pin-4pin)
For audio output, use the attached audio cable (4pin-
4pin) to connect sound device in output destination
and the main board.
Attached audio cable (4pin-4pin) branches off
connectors with different type and wiring
specification. Connect the side without branch to
main board, and the side with branch to sound
device in output destination. Use a connector
that complies with the connector type and wiring
specification for connecting destination. If you
cannot use the attached audio cable (4pin-4pin),
prepare another cable separately.
Output from sound device on board
Connect the audio cable to the terminal of
motherboard.
Note that onboard sound device (sound device
installed in motherboard: for details, see the
instruction manual for your PC or motherboard)
might interfere with the board installed in slot
depending on connector position of the device.
*
*