Grass Valley STORM 3G - Manual (Page 51)

STORM 3G ― Setup Guide 1
Storing Device Presets
Control Channel
Select whether to use RS-422 remote control.
Check Deck Control
Check if the deck connected to REMOTE
terminal can be controlled by EDIUS when
using RS-422 remote control.
VCR Constants
VCR ID(V)
VCR Constant 1 byte1 and byte2 are
displayed.
For SONY decks, the deck ID (including
model/mode) is displayed.
Check for Deck ID
Click it to load VCR ID (deck ID) from the
connected deck.
VCR
Display the deck name corresponding to the
VCR ID (only ID and deck names which are
set as preset). If there are multiple decks with
the same ID, all the decks are displayed.
Edit Delay
VCR Constant 1 Byte 6 is displayed.
If the deck is not in the preset, enter manually.
E-E Delay
VCR Constant 1 Byte 5 is displayed.
If the deck is not in the preset, enter manually.
Start Delay
VCR Constant 2 Byte 2 (Data 10 depending on
the VCR) is displayed.
If the deck is not in the preset, enter manually.
Load Default Presets
Initialize the edit delay, E-E delay, and start
delay with the preset values.