Grass Valley STORM 3G Elite - Manual (Page 28)

Section  ― Hardware Setting
28 STORM 3G ELITE ― Setup Guide
[5] ANALOG AUDIO MONITOR OUT (L/R) (XLR x 2)
Balanced audio monitor output.
If you connect a PC and STORM 3G Elite PCI Express
Expansion board using the attached USB cable, the
system sound of the PC and the audio of the edited
project are mixed in the USB audio of STORM 3G Elite
and output.
[6] REMOTE A (D-Sub9pin)
Remote A terminal.
[7] REMOTE B (D-Sub9pin)
Remote B terminal.
[8] HD/SD COMPONENT VIDEO IN (Y / Pb / Pr) (BNC x 3)
Y/Pb/Pr input and Y/C input of HD/SD.
To connect to S-VIDEO terminal of an external
device, prepare a conversion cable and connect its Y
terminal to the Pb terminal of STORM 3G Elite, and
connect its C terminal to the Pr terminal of STORM
3G Elite.
[9] HD/SD COMPONENT VIDEO OUT (Y / Pb / Pr) (BNC x 3)
Y/Pb/Pr output and Y/C output of HD/SD.
To connect to S-VIDEO terminal of an external
device, prepare a conversion cable and connect its Y
terminal to the Pb terminal of STORM 3G Elite, and
connect its C terminal to the Pr terminal of STORM
3G Elite.
To perform S-VIDEO output from the
COMPONENT VIDEO OUT terminal, see "Video
Output Settings" in step 7 of "Setting a Preview
Device" and configure the setting.
Video Output Settings
►P73
[10] HDMI IN (TYPE A)
HDMI input.
*
*