Grass Valley STORM 3G Elite - Manual (Page 54)

Section  ― Setting Editing Environments
 STORM 3G ELITE ― Setup Guide
Analog Output Settings
Setup Level
Select the setup level (black level) of NTSC
from "0IRE" and "7.5IRE". 0IRE is used in
Japan, and 7.5IRE is used in North America.
Component Level
Select the component level from "SMPTE"
and "BETACAM".
Component Gain
Adjust the output gain of the SD component.
SDI(B) Output Setting
Multi Format
HD/SD is switched automatically according
to the output format.
1080i when 1080p
When the output format is 1080p, the video is
output in 1080i format.
SD Only
Output downconverted video.
VITC Output
Line 1, Line 2
Set the number of VITC output lines in the input
field of adopted video standard (NTSC/PAL).
Component Output Setting
Multi Format
HD/SD is switched automatically according
to the input format.
SD Only - YPbPr
Output downconverted video (component
YPbPr).
SD Only - Y/C
Output downconverted video (S-Video).