Epson 7800P - Manual (Page 13)

EPSON PowerLite 7800p Projector
12 - EPSON PowerLite 7800p Projector 5/03
Using the Control Panel
This table describes the functions of the control panel buttons.
Controlling Multiple Projectors
If you’re using more than one projector, you can control all
the projectors—or just selected ones—by using the projector
ID system with just one remote control. To operate a
projector, you have to set the remote control’s ID to match
that of the projector. Or you can control all of the projectors
simultaneously by setting the remote control’s ID to zero.
Setting the Projector ID
The projector’s default ID is 1. If you need to change it,
follow these steps:
1. Access the projector’s Advanced2 menu, highlight
Projector ID and press Enter .
2. Press the right or left side of the pointer button to
increase or decrease the ID value.
3. Press Enter to set the value.
4. When done, press ESC to exit the menu system.
Setting the Remote Control ID
The remote control’s default ID is zero. If you need to change
it, follow these steps:
1. Press the ID button on the remote
control. You see it light up.
2. Press one of the numbered
buttons on the remote
control to select the desired
ID (0 through 9). Select zero
to control all projectors, or
select a number to match the
ID of the projector(s) you
want to operate.
The ID button’s light shuts off and the new ID is registered.
If you would like to check the remote control’s current ID,
press the
ID button twice. Count the number of flashes; this
number corresponds to the remote control’s ID. If it doesn’t
flash, the ID is set to zero.
Button Function
Power Turns the projector on or off.
Help Displays the online help menu.
Computer/
DVI Switches between the connected Computer and DVI
sources.
Video/BNC Switches between the connected video and BNC
sources (Video, S-Video, and BNC).
Menu Displays the on-screen menu system.
ESC Displays the previous menu when you’re viewing a
menu.
Auto/Enter Selects an option when the menu or help system is
active. When computer images are displayed, press to
auto-adjust the image.
Tracking
+ and –
Eliminates vertical banding that may be present in
some computer images. Use the Tracking buttons as
arrow keys to navigate the on-screen menu and help
systems.
Sync
+ and –
Corrects blurriness that may be present in some
computer images. Use the buttons as arrow keys to
navigate the on-screen menu and help systems.
Shift Press and hold to use the Tracking and Sync buttons.
A/V Mute Turns off audio and video, displaying the black, blue,
or user logo background. Press again to turn audio
and video back on.
Resize Adjusts how an image fits into the display area.
Keystone Squares an image that is “keystoned” or tapered on
the sides after tilting up the projector.
Volume Increases or decreases the sound.
Brightness Control Brightness Control High High Low Low : Video Video
Audio Audio
Setting Setting
User's Logo User's Logo
Advanced1 Advanced1
About About
Reset All Reset All
Projector ID Projector ID
Network Network
Reset Reset Execute Execute
: 1 : 1
[Menu]: Exit [Menu]: Exit
Effect Effect
Advanced2 Advanced2
COM Port COM Port
BNC Sync Termination BNC Sync Termination
:
ON ON OFF OFF :
Set Set
Set Set
RS-232C RS-232C USB USB
[ / ]: Select [ / ]: Select [ ESC ]: Return [ ESC ]: Return [ ]: Set [ ]: Set
Auto setup Auto setup : OFF OFF : ON ON
Zero