Epson 7800P - Manual (Page 16)

EPSON PowerLite 7800p Projector
5/03 EPSON PowerLite 7800p Projector - 15
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
This lets you see which projectors are currently being used,
from which source (or port) they are projecting an image, and
if a problem occurs.
Note: To monitor a projector when it’s in standby mode (plugged
in but not projecting), you must first select
Network ON as the
Standby Mode setting in the projector’s Advanced1 menu. You
can monitor up to 64 projectors.
For detailed status information, select the projector and click
View details .
The following tables explain the status, video source, and error
icons.
Controlling Your Projectors
The control buttons in the upper-right of the EMP Monitor
screen let you turn the projectors on and off and select video
sources. (Hold the mouse pointer over a button to see a
description of its meaning.) Make sure you’ve selected the
projector(s) you want to operate before clicking one of the
buttons.
Note: To turn on a projector when it’s in standby mode (plugged in
but not projecting), you first select
Network ON as the Standby
Mode setting in the projector’s Advanced1 menu.
Status icons
(green)
Projecting; no problems
(dark)
Turned off; no problems
(green)
Projecting; problems detected
(dark)
Turned off; problems detected
Network error (for example, not connected to
network or power cable disconnected).
You may also see this error if Network OFF is
selected in Standby Mode.
Video source icons
Computer
BNC
S-Video
Status icon Video Source icon Error icon
Video
DVI
Error icons
Lamp replacement notification (the lamp is
nearing the end of its life; see page 19)
High-speed cooling in progress (the
projector is getting too hot but continues to
operate)
Overheating (projection turned off
automatically)
Lamp out or lamp cover open
Fan error
Sensor error
Internal problem
Video source icons
Control buttons