Emerson Radio MS3110 - Manual (Page 11)

10
Connecting The Speakers
Note: Always connect the speakers before switching the power ‘On’, and
never operate the system without the speakers properly connected.
The speaker cables and the speaker terminals are color-coded.
Connect the Black with Gray dashes wires to the Red terminals.
Connect the Black wires to the Black terminals. If the wires are connected incorrectly
the sound will be “muddy” or distorted.
To make the connection, completely depress the plastic levers to open the terminals,
insert the bare end of the speaker wire into the terminal openings, and release the
plastic levers to lock the wires in place.
Black with
Gray Dashes
Black with
Gray Dashes
+ + R L
MS3110_112106.p65 22/11/2006, 11:48 10