Emerson Radio MS3110 - Manual (Page 27)

26
Recalling Preset Stations
1.) Turn the system ‘On’, press the TUNER/BAND button to select the Tuner
function and the desired band.
2.) Press the PRESET button repeatedly until the desired preset number and
frequency appears on the display.
• You may also use the number buttons on the remote control to directly select
the desired preset memory number.
• Simply press the corresponding number key on the remote handset to select
preset memory numbers 1 through 9.
• To select preset memory numbers 10 through 16, first press the “+10” button
and then the desired second digit.
For example, to select preset memory number 10, press the “+10” button and
then the “0” button.
To select preset 16, press the “+10” button and then the “6” button.
Changing Preset Stations
1.) Tune to the new station you want to memorize and press the PROGRAM or
MEMORY button to start the MEMORY indicator flashing.
2.) Repeatedly press the PRESET button until the display shows the number of
the preset memory you wish to change.
3.) Press the PROGRAM or MEMORY button again. The new station is entered in
the memory and the previous station is deleted.
MS3110_112106.p65 22/11/2006, 11:48 26