Emerson Radio MS3110 - Manual (Page 34)

33
5.) Repeat steps 3 and 4 selecting the desired Disc number and Track number
each time until you have entered up to 40 tracks in the CD program memory.
Note: You may also select the track numbers directly with the 1-9 number
buttons on the remote control.
• For tracks 1 through 9 simply press the corresponding number button.
• For tracks 10 and higher first press the “+10” button and then the
corresponding button for the second digit.
• For track 12, press “+10” and then press “2”.
• For track 23 press “+10” twice, then press “3”.
6.) Press the PLAY/PAUSE button to begin programmed playback.
The MEMORY indicator stops flashing
and remains on. The player will play the
track that you programmed in the desired
sequence.
• After the last programmed track has played the player stops, but the MEMORY
indicator remains on and the programmed sequence remains in the memory.
• To play the programmed sequence again, press the PLAY/PAUSE button.
• To cancel the programmed sequence from the memory press the STOP
button while the player is stopped. The MEMORY indicator disappears.
• The Program sequence can also be cleared from the memory by opening the
CD door, switching to Tuner or Aux function, or pressing the STANDBY
button to return the system to the Standby (Off) mode.
Programmed Repeat Playback
You can use the Programmed and Repeat Playback functions together to
continuously repeat a programmed sequence.
First program up to 40 tracks as described above, then press the REPEAT button
three times to select REPEAT ALL DISC playback.
Press the PLAY/PAUSE button to begin Programmed Repeat Playback. The
programmed sequence will be repeated continuously.
MS3110_112106.p65 22/11/2006, 11:48 33