HEIDENHAIN TNC 306 Service Manual - Manual (Page 92)

SERVICE MANUAL TNC 306/360
Page 85
HEIDENHAIN Service
18.3 PL Test Unit, Id.No. 247 359 01
Used:
- to test the PLC inputs and outputs at the PL (see section 17.2)
x x
18.4 Measuring Adapter, Id.No. 255 480 01
Used:
- to test the keyboard (see section 9.2)
- as a universal test unit for D-Submin connectors, 9pin to 37pin
MESSADAPTER
MEASURING ADAPTER
1 2 3 4 5 6 7 8 9
10
20
30
Note:
Adaptor cables are required for each connector size, as described on the following page.