HEIDENHAIN ND 1200T - Manual (Page 21)

1-1
Chapter 1
Overview
The Tool-Chek 200 is an advanced tool presetter readout system
that allows the user to establish datums using a setting gage and
measure tool offset relative to nominal dimensions. Using the
TC200 you can create a tool sequence to perform a series of com-
monly repeated tool measurements. Measurement results can be
viewed on the TC200’s LCD display, sent to a printer, or down-
loaded to a computer. The TC200 supports a variety of reporting
formats for the user to select.
The intuitive interface will be familiar to users of the Tool-Chek
and other Metronics products. Operators will find the TC200 easy
to understand and use thanks to a large LCD display and front
panel keys clearly marked with familiar function and mode sym-
bols.