HEIDENHAIN ND 1200T - Manual (Page 58)

Chapter 3 Setup
3-6
About
The About setup screen allows the user to change the default
display language. Users may choose English, French, German,
Spanish, or Italian. This screen also contains software version in-
formation. All procedures on this screen are user level.
Scroll through the setup menu using the up or down arrow keys
until About is highlighted.
Press the right arrow key to highlight items in the right portion of
the screen. Press the up or down arrow key or enter to scroll
through the languages. Highlight the desired language and press
the yes softkey. Press the left arrow key or finish to save the
language selection and return to the setup menu.
Display
The display setup screen contains 4 user level procedures and 4
supervisor level procedures. Users can change the startup units of
linear and angular measurement, select decimal or comma radi-
ces, and designate angular measurement format. Supervisors can
input display resolutions for millimeters, inches, decimal degrees;
and degrees, minutes, and seconds in addition to the above user
level procedures.