HEIDENHAIN ND 1200T - Manual (Page 4)

Proprietary notice
All information set forth in this document, all rights to such infor-
mation, any and all inventions disclosed herein and any patents
that might be granted by employing the materials, methods, tech-
niques or apparatus described herein are the exclusive property
of Metronics Incorporated, Bedford, New Hampshire.
No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the
prior permission of Metronics Incorporated. The information con-
tained herein is designed only for use with the Tool-Chek 200 Tool
Presetter Readout. Metronics Incorporated is not responsible for
any use of this information as applied to any other apparatus.
Disclaimer
The information contained in this document is subject to change
without notice. Metronics Incorporated assumes no responsibility
or liability for any errors or inaccuracies contained herein, or for
incidental or consequential damage in connection with the fur-
nishing, performance, or use of this guide.
Metronics Inc. shall not be liable to the purchaser of this product
or third parties for damages, losses, costs, or expenses incurred by
the purchaser or third parties as a result of: accident, misuse, or
abuse of this product or unauthorized modifications, repairs, or
alterations to this product, or failure to strictly comply with
Metronics Incorporated’s operating and maintenance instructions.
Trademarks
Metronics, Tool-Chek, Tool-Chek 200, and TC200 are registered
trademarks of Metronics Incorporated.
Other product names used herein are for identification purposes
only and may be trademarks of their respective owners. Metronics
Incorporated disclaims any and all rights to those marks.