HEIDENHAIN CNC Pilot 4290 V7.1 Description of B and Y axes User Manual
Cnc pilot 4290 b and y axis
Advertising
Table of contents
Document Outline
- CNC PILOT 4290 B and Y Axis
- B and Y Axis
- 1.1 Basics
- 1.2 Manual Control and Automatic Modes
- 1.3 Programming Notes
- 1.4 DIN PLUS: Section Codes
- 1.5 DIN PLUS: Contours in the XY Plane
- Starting point of contour G170 Geo
- Linear element G171 Geo
- Circular arc G172/G173 Geo
- Hole G370 Geo
- Linear slot G371 Geo
- Circular slot G372/G373 Geo
- Full circle G374 Geo
- Rectangle G375 Geo
- Eccentric polygon G377 Geo
- Linear pattern in XY plane, G471-Geo
- Circular pattern in XY plane, G472 Geo
- Single surface G376 Geo
- Centric polygon G477 Geo
- 1.6 DIN PLUS: Contours in the YZ Plane
- Starting point of contour G180 Geo
- Linear element G181 Geo
- Circular arc G182/G183 Geo
- Hole G380 Geo
- Linear slot G381 Geo
- Circular slot G382/G383 Geo
- Full circle G384 Geo
- Rectangle G385 Geo
- Eccentric polygon G387 Geo
- Linear pattern in YZ plane, G481-Geo
- Circular pattern in YZ plane, G482-Geo
- Single surface G386 Geo
- Centric polygon G487 Geo
- 1.7 DIN PLUS: Working Planes
- 1.8 DIN PLUS (Y Axis): Positioning Commands
- 1.9 DIN PLUS: Magazine Tools
- 1.10 DIN PLUS: Linear and Circular Paths
- 1.11 DIN PLUS (Y Axis): Milling Cycles
- Area milling—roughing G841
- Area milling—finishing G842
- Centric polygon milling—roughing G843
- Centric polygon milling—finishing G844
- Pocket milling - roughing G845 (Y axis)
- Pocket milling—finishing G846 (Y axis)
- Engrave in XY plane G803
- Engrave in YZ plane G804
- Thread milling in XY plane G800
- Thread milling in YZ plane G806
- Hobbing G808
- 1.12 Simulation
- 1.13 TURN PLUS: Tool Magazine and B Axis
- 1.14 TURN PLUS: Y Axis
- 1.15 TURN PLUS: XY Plane Contours
- Reference data - XY front/XYR back
- XY plane: Starting point of contour
- XY plane: Linear element
- XY plane: Arc
- XY plane: Single hole
- XY plane: Circle (full circle)
- XY plane: Rectangle
- XY plane: Polygon
- XY plane: Linear slot
- XY plane: Circular slot
- XY plane: Linear drilling pattern
- XY plane: Circular drilling pattern
- XY plane: Linear figure pattern
- XY plane: Circular figure pattern
- XY plane: Single surface
- XY plane: Centric polygon
- 1.16 TURN PLUS: YZ Plane Contours
- Reference data - Y lateral surface
- YZ plane: Starting point of contour
- YZ plane: Linear element
- YZ plane: Arc
- YZ plane: Single hole
- YZ plane: Circle (full circle)
- YZ plane: Rectangle
- YZ plane: Polygon
- YZ plane: Linear slot
- YZ plane: Circular slot
- YZ plane: Linear drilling pattern
- YZ plane: Circular drilling pattern
- YZ plane: Linear figure pattern
- YZ plane: Circular figure pattern
- Single surface in YZ plane
- Centric polygons in YZ plane
- 1.17 Example Programs