HEIDENHAIN CNC Pilot 4290 Description of the Y axis User Manual
Page 2
Y Axis
2
Contents
1
The Y Axis
3
2
Y Axis in DIN PLUS
4
2.1
Section Codes, Overlapping Contours
6
2.2
G Functions for Contour Description
7
2.2.1
Contours in the XY Plane (Front and Back)
7
2.2.3
Contours in the YZ Plane (Side View)
15
2.3
G Functions for Machining
23
2.3.1
Working Planes
23
2.3.2
Positioning Moves
23
2.3.3
Simple Linear and Circular Paths
25
2.3.4
Milling Cycles
27
2.3.5
Full-Surface Machining
33
2.4
Examples
34
2.4.1
Milling with the Y Axis
34
2.4.2
Full-Surface Machining Y Axis
38
3
Y Axis in Simulation
42
4
Y Axis in TURN PLUS
44
4.1
TURN PLUS Milling Contours
44
4.1.1
Definition of Reference Data
45
4.1.2
Contours in the XY Plane (Front and Back)
46
4.1.3
Contours in the YZ Plane (Side View)
53
4.1.4
Machining with the Y Axis
60
CNC PILOT 4290 with Y Axis
This manual describes functions that are available for the Y axis in
the CNC PILOT 4290 with NC software number 340 460-xx (Re-
lease 6.1). This manual is a supplement to the CNC PILOT 4290
User's Manual.
Y_4290BH.pm6
08.03.2005, 08:35
2