HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 413)

HEIDENHAIN TNC 320 413
12.9 Ether
n
et Int
e
rf
ace
SMB option Options that concern the SMB file system type:
Options are given without space characters,
separated only by commas. Pay attention to
capitalization.
Options:
ip: IP address of the Windows PC to which the
control is to be connected
username: User name with which the control is
to log on
workgroup: Work group under which the control
is to log on
password: Password with which the TNC is to
log on (up to 80 characters)
Further SMB options: Input of further options
for the Windows network
Automatic
connection Automount (YES or NO): Here you specify
whether the network will be automatically
mounted when the control starts up. Devices
not automatically mounted can be mounted
anytime later in the program management.
You do not need to indicate the protocol with the
iTNC 530. It uses the transmission protocol according to
RFC 894.
Setting Meaning