HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 458)

458
Comparison: Miscellaneous functions
M Effect TNC 320 TNC 310 iTNC 530
M00 Stop program/Spindle STOP/Coolant OFF
M01 Optional program STOP
M02 Stop program/Spindle STOP/Coolant OFF/Clear status display
(depending on machine parameter)/Go to block 1
M03
M04
M05 Spindle ON clockwise
Spindle ON counterclockwise
Spindle STOP
M06 Tool change/Stop program run (machine-dependent function)/Spindle
STOP
M08
M09 Coolant ON
Coolant OFF
M13
M14 Spindle ON clockwise/Coolant ON
Spindle ON counterclockwise/Coolant ON
M30 Same function as M02
M89 Vacant miscellaneous function or
Cycle call, modally effective (machine-dependent function)
M90 Constant contouring speed at corners
J
M91 Within the positioning block: Coordinates are referenced to machine
datum
M92 Within the positioning block: Coordinates are referenced to position
defined by machine tool builder, such as tool change position
M94 Reduce display of rotary axis to value under 360°
M97 Machine small contour steps
M98 Machine open contours completely
M99 Blockwise cycle call
M101
M102
Automatic tool change with replacement tool if maximum tool life has
expired
Cancel M101 J
M107
M108 Suppress error message for replacement tools
Cancel M107 J
M109
M110
M111
Constant contouring speed at tool cutting edge
(increase and decrease feed rate)
Constant contouring speed at tool cutting edge
(feed rate decrease only)
Cancel M109/M110 J