HEIDENHAIN TNC 320 (340 55x-05) Cycle programming - Manual (Page 211)

HEIDENHAIN TNC 320 211
8.5 Pr
ogr
amming Examples
8 L C+0 R0 FMAX M3 M99 Pre-position rotary table, spindle ON, call the cycle
9 L Z+250 R0 FMAX Retract the tool
10 PLANE RESET TURN FMAX Tilt back, cancel the PLANE function
11 M2 End of program
12 LBL 1 Contour subprogram, description of the midpoint path
13 L C+40 X+0 RL Data for the rotary axis are entered in mm (Q17=1), traverse in the
X axis because of 90° tilting
14 L X+35
15 L C+60 X+52.5
16 L X+70
17 LBL 0
18 END PGM C28 MM