HEIDENHAIN iTNC 530 (340 49x-06) ISO programming - Manual (Page 454)

454 Manual Operation and Setup
14.2 Mo
ving the Mac
hine Ax
es
Handwheel display
The handwheel display (see image) consists of a header and 6 status
lines in which the TNC shows the following information:
1
3
12
2 8
4
5 7
6
9 9 2 11 10 10
2
5
13
14
1 Only HR 550 FS wireless handwheel:
Shows wether the handwheel is in the docking station or
whether wireless operation is active
2 Only HR 550 FS wireless handwheel:
Shows the field strength, 6 bars = maximum field strength
3 Only HR 550 FS wireless handwheel:
Shows the charge status of the rechargeable battery, 6 bars =
fully charged A bar moves from the left to the right during
recharging
4 ACTL : Type of position display
5 Y+129.9788 : Position of the selected axis
6 * : STIB (control in operation); program run has been started or
axis is in motion
7 S0: : Current spindle speed
8 F0: Feed rate at which the selected axis is moving
9 E : Error message
10 3D : Tilted-working-plane function is active
11 2D : Basic rotation function is active
12 RES 5.0: Active handwheel resolution. Distance in mm/rev (°/rev
for rotary axes) that the selected axis moves for one handwheel
revolution
13 STEP ON or OFF: Incremental jog active or inactive. If the function
is active, the TNC also displays the active jog increment
14 Soft-key row: Selection of various functions, described in the
following sections