HEIDENHAIN iTNC 530 (60642x-04) - Manual (Page 666)

666 MOD Functions
1
7.2 Sof
tw
a
re
numbers
17.2 Software numbers
Application
The following software numbers are displayed on the TNC screen
after the MOD functions have been selected:
 NC : Number of the NC software (managed by HEIDENHAIN)
 PLC : Number and name of the PLC software (managed by your
machine tool builder)
 Feature Content Level (FCL): Development level of the software
installed on the control (see "Feature content level (upgrade
functions)" on page 10). The TNC displays --- on the
programming station, since there is no Feature Content Level
there.
 DSP1 to DSP3: Number of the speed controller software
(managed by HEIDENHAIN)
 ICTL1 and ICTL3: Number of the current controller software
(managed by HEIDENHAIN)