SMA SC 500CP-10-JP Installation Manual - Manual (Page 38)

8 Installing the Sunny Central SMA Solar Technology AG
38 SCCP-JP-IA-A4-en-12 Installation Manual
8.5 Mounting the Silencing Baffle
For order option "Noise reduction", a silencing baffle will be delivered with the inverter. The silencing baffle must be
mounted to the rear panel of the inverter cabinet. When mounting, use the allround paste from the scope of delivery for
the bolted connections.
Procedure:
To mount the silencing baffle, perform the following actions in the specified order. The following sections describe the
exact procedure.
• Mounting the rear panel of the silencing baffle
• Mounting the lid of the silencing baffle
• Mounting the rain protection
Mounting the Rear Panel of the Silencing Baffle
Required mounting material:
☐ 2 cylinder head screws
☐ 2 contact washers
Procedure:
1. Align the rear panel of the silencing baffle at the rear panel of the
inverter.
2. Screw two cylinder head screws with contact washers into the
middle thread of the rear panel. The rear panel of the silencing
baffle must remain flexible.