SMA String-Monitors Optical Fiber Interface Module - Manual (Page 19)

Symbol Explanation
Indicates a requirement for meeting a specific
goal
Desired result
A problem that might occur
2 Safety
2.1 Intended Use
The optical fiber interface module and the optical fiber splice box set for the SMA String-Monitors
enable the communication with optical fibers in the following SMA String-Monitors from production
version A1:
• SSM-U-1610 / SSM-U-1615
• SSM-U-2410 / SSM-U-2415
• SSM-U-3210 / SSM-U-3215
The optical fibers are fanned out, spliced and connected with the SC duplex adapter in the splice
box. Thus, the SC/SC duplex patch cable can be connected with the optical fiber.
The product is suitable for operation in one of the above-mentioned SMA String-Monitors.
The SMA String-Monitor still complies with the applicable standards after the product has been
installed.
All work on the product must only be performed using appropriate tools and in compliance with the
ESD protection regulations.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable standards and directives. Any other application may cause
personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and usually void the operating license. SMA Solar Technology AG shall not be
held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as
appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
2 Safety SMA Solar Technology AG
Installation Manual 19 SSMLWL-IA-xx-10
ENGLISH