SMA DU-SC-US - Manual (Page 16)

Unpacking the Disconnect Unit SMA America, LLC
16 DISU_SCUS-AP-eng-IUS110911 Unpacking
6 Unpacking the Disconnect Unit
6.1 Removing the Film
The Disconnect Unit is packed using a protective film. This film is affixed to the pallet. Remove this film
as described in this section.
1. Cut through film close to the pallet.
2. Pull film off the Disconnect Unit upward.
/05*$&
Damage to property caused by sharp objects!
When cutting through the film with a sharp object you could damage the enclosure of the
Disconnect Unit.
• Only cut through the film close to the pallet.
• Observe the correct distance from the enclosure.