SMA DU-SC-US User Manual
Page 26
Advertising
![background image](/files/818721/content/doc026.png)
Preparing the Disconnect Unit for Installation
SMA America, LLC
26
DISU_SCUS-AP-eng-IUS110911
Unpacking
3. Turn all switches on the Disconnect Unit to the left into
the "Off" position. Push or pull the switches hard to
move them.
4. Release all screws with the exception of the screws in
the four corners of the front plate.
5. Hold the front plate of the Disconnect Unit and
release the last four screws.
6. Pull the bottom edge of the front plate of the
enclosure approximately 6 in. (150 mm) to the front.
On
Off
Advertising