SMA DU-SC-US - Manual (Page 23)

SMA America, LLC Transporting the Disconnect Unit Without Packaging
Unpacking DISU_SCUS-AP-eng-IUS110911 23
4. Remove both rear kick plates.
Transporting the Disconnect Unit
1. Drive the forklift truck under the Disconnect Unit at the
front or back.
2. Secure Disconnect Unit against tipping, for example using lashing straps.
3. Raise the Disconnect Unit slightly.
4. Transport the Disconnect Unit to the installation site.
8"3/*/(
Danger of crushing caused by tipping of the Disconnect Unit!
If insufficiently secured, the Disconnect Unit can tip over.
• Only transport the Disconnect Unit as described in this manual.
• Observe the center of gravity of the Disconnect Unit.
• All means of transport used must be designed for the weight of the Disconnect Unit of
1 510 lbs. (685 kg).
• Do not tip Disconnect Unit over during transport.
• Transport the Disconnect Unit only if sufficiently secured.
• Keep a safe distance from the Disconnect Unit at all times during transport.