SMA SI 3324 Installation - Manual (Page 81)

SMA Technologie AG Commissioning
Installation Guide SI3324/4248-14:SE2406 Page 81
8.9 Starting after First Commissioning
Once all parameters have been set, the Sunny Island 3324/4248 can be put into
operation.
Make sure that the message "To start press
<ENTER>" appears in the display by pressing
<ESC> until you access the main menu and then
pressing an arrow key until the "To start press
<ENTER>" message appears.
Press <ENTER> and the Sunny Island 3324/4248 will start.
A single beep will be heard.
The green LED on the control panel of the Sunny Island 3324/4248 will illuminate.
Once successfully started, a status overview
message appears in the display, showing the
current operating mode and the output power
(see also figure below):
To start
press <ENTER>
[¿¿¿¿¿¿_______]
Invert oo
[¿¿¿¿¿¿¿¿¿¿¿¿ ]
>Invert L oo E
Output power/charging power
Direction of energy
Load shedding relay Generator status
Generator control
relay
Fault display
Operating mode
Load status