5 installation procedure – Yaskawa 1000 Series Drive Option - Analog Monitor User Manual
Page 20
Advertising
5 Installation Procedure
20
YASKAWA ELECTRIC TOBP C730600 40E 1000-Series Option AO-A3 Installation Manual
6.
Route the option wiring.
Depending on the unit model, some units may require routing the wiring through the
side of the front cover to the outside. In these cases, cut out the perforated openings
on the left side of the unit front cover as shown in
-A and leave no sharp
edges to damage wiring.
Route the wiring inside the enclosure as shown in
-B for units that do not
require routing through the front cover.
Refer to the Peripheral Devices & Options section of the unit Instruction Manual for
more information.
Figure 9
Figure 9 Wire Routing Examples
A
B
Advertising