Yaskawa BACnet Option - Manual (Page 7)

Yaskawa America, Inc. – www.yaskawa.com
IG.AFD.23.BACnet, Page 7 of 12
Date: 7/07/2011 Rev: 11-07
BACnet
®
Option
Installation Guide
16. Analog Values (AV)
Obj ID Obj Name Bit Name Read/ Write Scale Unit
AV1 Operation Cmd
0 Run Forward
Write Bit Field
1 Run Reverse
2 External Fault (EF0)
3 Fault Reset
4 ComNet
5 ComRef
6 Multi-Function Input 3
7 Multi-Function Input 4
8 Multi-Function Input 5
9 Multi-Function Input 6
10 Multi-Function Input 7
11 Multi-Function Input 8
12 Reserved
13 Reserved
14 Reserved
15 Reserved
AV2 Frequency Cmd Scaled by o1-03 with Units selected by Parameter o1-09 Write o1-03 o1-09
AV3 1 PI Setpoint Cmd
Reference Select PID (BO4) must be set to ON in order to use AV3
Scaled by Parameter b5-20 with Units by b5-31
Write b5-20 b5-31
AV4 MF Outputs Cmd
0 Relay Output
Write
1 PCH1
2 PCH2
3 Reserved
4 Reserved
5 Reserved
6 Error Relay Enable (Must be Set Before bit 7)
7 Error Relay
8-15 Reserved
AV5
Reference Select
Cmd
0 Reserved
Write Bit Field
1 Ref. Select PID
2-11 Reserved
12 Ref. Select Terminal 5
13 Ref. Select Terminal 6
AV6 Drive Status
0 @ Run
Read Bit Field
1 @ Reverse
2 @ Inverter Ready
3 @ Fault
4 @ Data Set Error
5 @ Relay Output
6 @ PCH1
7 @ PCH2
8-15 Reserved
Note
1 In order to use AV3
(Ref Sel: PI Setpoint)
Set b5-01 = 1
Set BO4 (Ref Sel: PI Setpoint) to ON
Set the desired value in AV3 in percent of max frequency