Yaskawa MPiec User Manual
Page 4
Advertising
Subject: Application Note
Product: MPiec
Doc#: EM.MCD.09.043
Title: Implementing Electronic Cams with MPiec: Quick Start Guide
August 30, 2012
Page 4 of 16
Figure 2 is a screenshot of the
“Set Parameter” screen for inputting key points that build the cam profile. A
variety of curves can be selected from
the “Curve Shape” drop down menu.
Figure 2: Cam profile generation page
Figure 3 is a screen shot of an
“Out and Back” (Two way) cam profile. The X Axis is the master position and the
Y axis is the slave position.
Figure 3: Two way cam profile
Advertising