Yaskawa DO-08 - Manual (Page 3)

Yaskawa Electric America, Inc. – www.drives.com
IG.AFD.56, Page 3 of 4
Date: 07/01/04, Rev: 04-07
Digital Output Option Card
DO-08
Table 3. DO-08 Output Mode Selection
GPD515/G5
Parameter
F6-01 Setting
F7, G7
Parameter
F5-09 Setting
Output Type Terminal Output Content
TD5-TD11 Overcurrent (SC, OC, GF)
TD6-TD11 Overvoltage (OV)
TD7-TD11 Drive Overload (OL2)
TD8-TD11 DC Bus Fuse Blown (FU, PUF)
TD9-TD11 Not Used
TD10-TD11 Overheat (OH)
TD1-TD2 Zero-Speed
0 0 Fixed Data
TD3-TD4 Speed Agree
TD5-TD11 Bit 0
TD6-TD11 Bit 1
TD7-TD11 Bit 2
TD8-TD11
Coded
Output,
See
Table 4 Bit 3
TD9-TD11 Zero-Speed
TD10-TD11 Speed Agree
TD1-TD2 Running
1 1 Coded Output
TD3-TD4 Minor Fault
TD5-TD11 F5-01
TD6-TD11 F5-02
TD7-TD11 F5-03
TD8-TD11 F5-04
TD9-TD11 F5-05
TD10-TD11 F5-06
TD1-TD2 F5-07
- 2
Individually
Selectable
See Table 5
TD3-TD4 F5-08
Table 4. Details of DO-08 Coded Output
Bits 3, 2, 1, 0 Output Content Bits 3, 2, 1, 0 Output Content
0000 No Fault 1000 External Fault (EFXX)
0001 Overcurrent (SC, OC, GF) 1001 Drive Hardware Fault (CPFXX)
0010 Overvoltage (OV) 1010 Motor Overload (OL1)
0011 Drive Overload (OL2) 1011 Not Used
0100 Drive Overheat (OH2) 1100 Power Loss (UV) (Including momentary power loss)
0101 Not Used 1101 Not Used
0110 Fuse Blown (FU) 1110 Not Used
0111 Not Used 1111 Cooling Fan Fault (Fan)