Yaskawa UUX000458 - Manual

Digital Operator Remote Mount Option Kits
UUX000458, UUX000459
Yaskawa Electric America, Inc – www.drives.com
IG.AFD.72, Page 1 of 4
Date: 6/14/07, Rev: 07-06
Part Numbers: UUX000458 (blank overlay), UUX000459 (Yaskawa logo overlay).
Applicability: F7, G7, P7, E7
Introduction: This kit is designed to provide the functionality of the digital operator on an enclosure designed for a NEMA Type 1,
3R, 4, 4X, 12, or IPX6 environment. Refer to UL file number E131457 for details. This guide is divided into three sections detailing
the kit parts, chemical resistance, and kit installation.
WARNING
HAZARDOUS VOLTAGE CAN CAUSE SEVERE INJURY OR DEATH. LOCK ALL POWER SOURCES TO THE DRIVE
IN THE “OFF” POSITION.
• To prevent physical damage to the Drive, read these instructions thoroughly before installing.
CAUTION
• Partially tighten and torque all hardware prior to tightening to the rated torque specifications.
• Tighten the screws in a cross-like pattern to prevent damage to the threads.
• Do not exceed the recommended torque values as described in the instructions.
Receiving: Unpack the option kit and verify that all components are present and undamaged.
Included Part List (Either Kit) Quantity
Installation Guide (IG.AFD.72) 1
1:1 Cutout Template (UDM00201) 1
Mounting Bracket Subassembly 1
M3 x 6 screw 2
Operator Z-Bracket 2
#8-32 nut w/captive washer 4
#10-32 nut w/captive washer 6
Digital Operator Cable 3ft 1
Digital Operator Cable 10ft 1
Note: Please carefully remove the protective pink plastic from the mounting bracket membrane prior to kit installation.