Yaskawa Microtrac LAN ARCNET Active hub - Manual (Page 14)

OPERATION
10 What To Do When the Recon Indicator Lights Up
4/23/97
At this point, one or more trouble LAN segments have been isolated. These
LAN segments generated RECONs. The nodes on these LAN segments
should be looked at next, in order to isolate the trouble making node.
A
Does
Recon
LED stay
‘ON’
?
Yes
No
(Go to
next LAN
segment)
Disconnect all LAN
segments from Hub.
From first LAN seg-
ment to #X LAN
segment used:
Connect LAN
segment to Hub.
Disconnect that
LAN segment.
Is
this the last
LAN segment
?
Yes
No
Proceed as
indicated below.
RD 90-279 © 1997 MagneTek, Inc. 97-04