Yaskawa EUS61501X - Manual (Page 4)

4 YASKAWA TOEP YEAOPT 06 YASKAWA AC Drive - G5HHP Power Supply Unit with Charge LED Safety Precautions
1 Preface and Safety
1 Preface and Safety
Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection
and application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa
accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances
should any Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without
exception, all controls should be designed to detect faults dynamically and fail safely under all circumstances. All systems
or equipment designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with
appropriate warnings and instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa
must be promptly provided to the end user. Yaskawa offers an express warranty only as to the quality of its products in
conforming to standards and specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESSED
OR IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses, or claims
arising from misapplication of its products.
‹ Applicable Documentation
These Safety Precautions apply to the G5 HHP Power Supply Unit with Charge LED, models EUS61501 and
EUS61502 .
‹ Supplemental Safety Information
Read and understand these safety precautions before installing, operating, or servicing this Power Supply Unit.
The following conventions are used to indicate safety messages in this manual. Failure to heed these messages could
result in serious or possibly even fatal injury or damage to the products or to related equipment and systems.
G5 HHP Power Supply Unit with Charge LED
Yaskawa AC Drive G5 HHP Power Supply Unit with Charge LED Safety Precautions:
Document No. TOEP YEAOPT 06
Read these safety precautions first.
These safety precautions are packaged with the G5 HHP Power Supply Unit with Charge LED.
It contains important safety information related to this product.
DANGER
Indicates a hazardous situation, which, if not avoided, will result in serious injury or death .
W ARNING
Indicates a hazardous situation, which, if not avoided, could result in serious injury or death.
NOTICE
Indicates an equipment damage message.
W ARNING
Risk of Electric Shock - Do Not
Touch
Charge LED
W
ARNING
Risk of Electric Shock - Do Not T
ouch
The internal capacitor remains charged
after the power supply is turned of
f.
Disconnect all power to the drive before
servicing.
Wait until the status indicator LED is of
f,
and then measure DC bus voltage to
confirm a safe level below 50 Vdc before
servicing. The charge indicator LED will
extinguish when the DC bus voltage is
below 50 Vdc.
Failure to comply can result in serious
injury or death from electric shock.
MAS S: 3.1 Kg POWER SUPPL Y UNIT CODE NO .: SER NO. : N4WX XXX- X- X
LO T NO .: YASKA W A ELECTRIC CORPORA TI ON EUS6150XX