Edelbrock 15017 User Manual
Edelbrock For the car
Catalog # 15017
©2005 Edelbrock Corporation
Brochure #63-0343, Rev. 3/05
REPLACEMENT TURBO OUTLET ELBOW TO DOWN-PIPE GASKET
Catalog #15017
INSTALLATION INSTRUCTIONS
PLEASEstudy these instructions carefully before installing your new Edelbrock Gasket Kit. If you have any questions or problems, do not hesitate
to contact our
Technical Hotline at: 1-800-416-8628, from 7am-5pm, Monday-Friday, Pacific Standard Time or via e-mail at:
[email protected]. Please fill out and mail your warranty card.
DESCRIPTION: Kit contains a replacement outlet elbow to downpipe gasket as is used in Edelbrock Turbo Kits #1500, 1501, 1502, 1503, and
1504, for use when removing and replacing the downpipe for exhaust maintenence, engine maintenence, etc.
INSTALLATION
1. Remove the down-pipe in the reverse order of installation as shown in your Edelbrock Turbo Kit instructions.
2. Make sure all gasket mating surfaces are clean and free of grease or oil, and make sure any old gasket material has been removed before
installing the new gaskets.
3. Install the new gasket and install the down-pipe as shown in your Edelbrock Turbo Kit instructions.
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: [email protected]
Catalog # 15017
©2005 Edelbrock Corporation
Brochure #63-0343, Rev. 3/05
REPLACEMENT TURBO OUTLET ELBOW TO DOWN-PIPE GASKET
Catalog #15017
INSTALLATION INSTRUCTIONS
PLEASEstudy these instructions carefully before installing your new Edelbrock Gasket Kit. If you have any questions or problems, do not hesitate
to contact our
Technical Hotline at: 1-800-416-8628, from 7am-5pm, Monday-Friday, Pacific Standard Time or via e-mail at:
[email protected]. Please fill out and mail your warranty card.
DESCRIPTION: Kit contains a replacement outlet elbow to downpipe gasket as is used in Edelbrock Turbo Kits #1500, 1501, 1502, 1503, and
1504, for use when removing and replacing the downpipe for exhaust maintenence, engine maintenence, etc.
INSTALLATION
1. Remove the down-pipe in the reverse order of installation as shown in your Edelbrock Turbo Kit instructions.
2. Make sure all gasket mating surfaces are clean and free of grease or oil, and make sure any old gasket material has been removed before
installing the new gaskets.
3. Install the new gasket and install the down-pipe as shown in your Edelbrock Turbo Kit instructions.
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: [email protected]