Irritrol CRR User Manual

Page 8

background image


To Set the PIN in the Climate Logic Receiver Module:
1. After setting the PIN in the handheld transmitter (see

above), open the Climate Logic receiver module.

2. Press the MENU button to get to the Main Menu on

the module’s display.

3. Repeatedly press the UP or DOWN key on the module

to move the cursor to REMOTE.

4. Press ENTER to get to the Remote PIN screen.
5. Repeatedly press the UP or DOWN key to set the first

digit on the left.

6. Press NEXT to move one digit to the right.
7. Repeat the steps to set all four digits in the PIN.
8. With the PIN matching the handheld receiver’s PIN,

press SAVE.