Lanner FW-7582 - Manual (Page 22)

18
Bios Settings
Chapter 4
Network Application Platforms
CPU Configuration Settings
You can use this screen to view the capabilities and of your
CPU. You can also use this menu to enable/disable certain
functions of your CPU. Use the up and down <Arrow> keys
to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option. A description of
the selected item appears on the right side of the screen.
The settings are described below.
Item Selection
Active Pro-
cessor Core
Select the number of processor cores to
be active.
Limit CPUID
Maximum
Allows legacy operating systems to boot
even without support CPUs with extend-
ed CPUID functions.
Select to enable or disable this function
Execute Dis-
able Bit
Select to enable or disable the No-Execu-
tion Page Protection Technology.
Intel Virtual-
ization
The Intel VT is a hardware-assisted virtual-
ization. This processor supports Intel Vir-
tualization. Enable or disable this feature.
SATA Controllers Configuration Settings
While entering Setup, the BIOS automatically detects
the presence of SATA devices. The SATA Port items show
“Empty” if no SATA device is installed to the corresponding
SATA port.
SATA Controllers
Item Selection
Enable or
Disable SATA
Controller(s) Set this value to enable or disable SATA
controllers