Lanner LEC-7106 - Manual (Page 17)

17
Hardware Setup
Chapter 4
Embedded and Industrial Computing
Installing the Hard Disk
The system can accommodate one Serial-ATA disk. Follow
these steps to install a hard disk into the LEC-7106:
Place hard disk alongside of the mounting bracket 1.
and align the holes of the hard disk with the mounting
holes of the bracket
Attach the hard disk to the bracket with 4 mounting
2.
screws.
Connect the Serial-ATA power and data cables to the
3.
hard disk’s connectors.
Attach the hard disk with the bracket back to the
4.
system.
Plug the Serial-ATA cables (power and data) to the
5.
Serial-ATA Connectors on the main board.
1
Installing the 3G SIM Card
Unlock the SIM card reader by sliding it outward and 1.
flip it up diagonally.
The angled corner of the SIM ensures that the card fits
2.
only the correct way in the tray. Make sure that the ICs
will be in contact with the bottom of the reader.
Insert the
3. SIM card into the reader diagonally. Close
and lock the reader. You should feel a click when the
SIM card is locked securely in the reader.
Installing the Wireless 3G Module
Align the wireless module’s key with the Mini-PCIe slot 1.
notch.
Insert the wireless module into the connector
2.
diagonally.
Attach the wireless module to the slot with the screws
3.
(Use the Mini-PCIe module screws contained within
the package).
3
2
Installing SIM Card
Unlock lock
Installing 3G and Wi-Fi module on the PCIe socket