Linkskey LKV-9208IP - Manual (Page 81)

Prima IP User Guide Rev. 1.6
4.13 KVM Server/Video Mode Database –
Keeping, Modifying And Augmenting
Your Video Display Mode Database
The Video Mode Database page allows you to modify, create and suppress the VGA
modes supported by the device.
Important Note: Carelessly modifying a video mode on this video database might obliterate the
video capture, thus DO NOT MODIFY anything unless you know exactly what you are doing.
After you have made all modifications, click Store Settings to save your settings and
then hit Apply Settings / Restart Servers to validate these new settings. Every change
you have made on this page will NOT apply until you hit Apply Settings / Restart
Servers!
Use the drop down box to select a video mode from the video mode database. Each
video mode is indicated by the pixel dimension (length by width) at a certain refresh
frequency:
Width_in_pixels x Height_in_pixels @ Refresh_Rate_in_Hz
For example, 1024 x 768@60Hz is a video mode and 1024 X 768@72 Hz is another
video mode. Together with the refresh rate and the pixel dimensions, a video mode
can be adjusted with those parameters such as screen width, total width, Hsync start,
as well as screen height, total height, and Vsync start.
The following diagram explains the geometric relations between the VGA parameters.
- 77 -