Eiki LC-NB3E - Manual (Page 15)

-15-
1 Remove 2 screws A and pull the Condenser Lens ass’y upward.
2 Remove 4 screws B to take the Lens off from the holder.
1 Remove 2 screws A and pull the Condenser Lens-Out ass’y upward.
2 Remove 2 screws B to take the Lens off from the holder.
Note:
Lens should be placed as shown in the figure below.
A
Optical Pats Disassemblies
B
Condenser Lens
Fig.3- 2
Fig.3- 1
* Lens should be placed as the flat
surface side comes to the holder
side.
Holder
A
A
Fig.4- 2
Fig.4- 1
B
B
Holder
Condenser Lens-Out
A
Condenser lens disassembly
Condenser Lens-Out disassembly
B
B
B
Side View