Curtis DVD7620 - Manual (Page 25)

- 25 -
General Setup Page:
TV Display
You can choose a display that affects how a disc’s content appears on your TV screen.
1. Normal/PS (Pan Scan):
Select when the unit is connected with a normal TV. Wide-Screen images are shown on the screen,
but with some parts cut automatically.
2. Normal/LB (Letterbox):
Select when the unit is connected to a normal TV. Wide-screen images are shown on the screen
with a black band at the top or bottom.
3. Wide (16:9 Widescreen):
Select when the unit is connected to a wide-screen TV.
TV Type
You may select according to the color system of the TV to be connected. The TV type feature allows
you to choose NTSC or PAL.
Video Out
Select the color video type and switch mode to fit your connector type:
S-VIDEO: Select when using CVBS and S-Video Out.
YUV: Select when using Component Video Out.
Angle Mark
To select angle mark display ON/OFF when angle mark is available.
OSD Lang
The OSD Lang feature enables you to set the preferred on-screen menu language: English, French or
Spanish.
Captions
Select this option when some newer DVD movies include closed captioning for hearing impaired
viewers.
• Select “ON” to switch on the captioning feature that describes other sounds being heard together
with the dialog.
Screen Saver
Setting the screen saver to on the screen saver image appears when the unit stops or the image is
motionless for approximately 1 minute. This saver can keep the screen from being demaged.
• ON: Start the screen saver.
• OFF: Remove the screen saver.
Audio Setup Page:
Select Audio and then select the desired option using the Navigation ( , , , ) buttons to navigate
through the menus/screens and press the OK button to select.
Downmix: Sets the Audio Output mode.
LT/RT: The front speaker are in theatrical LT/RTdownmix mode.
Stereo: The front speaker are in stereo downmix mode.
CURTIS DVD7620_Engib.p65 5/3/2007, 11:35 AM 25