Curtis DVD7620 - Manual (Page 26)

- 26 -
Dolby Digital Setup:
Select Dolby and then select the desired option using the Navigation ( , , , ) buttons to navigate
through the menus/screens and press the OK button to select.
Stereo: Select this to set the Dolby Digital output to stereo mode.
L-Mono: Select this to set the Dolby Digital output to left mono mode, meaning it will reproduce the
left mono signal to the left and right channels.
R-Mono: Select this to set the Dolby Digital output to right mono mode, meaning it will reproduce the
right mono signal to the left and right channels.
Mix-Mono: Select this to reproduce both channels mixed together.
Preference Page:
Select Preference and then select the desired option using the Navigation ( , , , ) buttons to
navigate through the menus/screens and press the OK button to select.
Audio
Select the language the DVD will be played back in (English, French, Spanish, German, or Japanese).
The DVD must be recorded in the selected language, otherwise the default language of the DVD will
be played.
Subtitle
Select the language the Subtitle (OSD) will be in (English, French, Spanish, German, Japanese or Off).
The DVD must be recorded in the selected language, otherwise the default language of the DVD will
be shown.
Note: Discs are created differently. The DVD player can’t override some language preferences. If a
disc’s software was created to play the movie (title) in a perferred language, the preference
you set might be ignored. Also, if the language isn’t available on the disc you’re playing the
disc’s default language will be chosen. if the disc wasn’t created with subtitles, you won’t be
able to use the Subtitle feature.
Disc Menu
Select the language the Disc Menu will be in (English, French, Spanish, German, or Japanese). The
DVD’s Disc Menu must be made in the selected language, otherwise the default language of the DVD
will be shown.
Password
• Press the Navigation ( , ) buttons to select Password. Press the Navigation ( ) button to select
Change.
• Press the OK button to change the password.
• Input your old password (the factory default password is “1234”), and then enter your desired
4-digit code new Password to the new Password column. The player will jump to the Confirmed
Password column automatically. Press the OK button again. The desired new password will then be
set; be sure to write it down for future reference.
Default
Select this option to reset all preferences to their original factory settings.
CURTIS DVD7620_Engib.p65 5/3/2007, 11:35 AM 26