Casio CDP-200R - Manual (Page 18)

E-16
Sampling Sounds and Playing Them on the Digital
Piano
You can sample a sound from a microphone, a portable audio
player, or other device, and then play the sound on the Digital
Piano’s keyboard. For example, you could sample the bark of
your dog and then use the sound in a melody. You also can
sample and use passages from a CD. The sampling feature is
a great way to create new sounds that are highly creative.
• Before connecting, make sure that the Digital Piano,
external devices, and/or the microphone all are turned
off.
1.
Connect a microphone or external device to the
Digital Piano.
• You also could connect a commercially available
microphone.
• Connection of an external device requires commercially
available connecting cords, supplied by you. Connecting
cords should have a stereo mini plug on one end and a plug
that matches the configuration of the external device on the
other end.
2.
Turn down the volume levels of the external
device and the Digital Piano.
3.
Turn on the external device or microphone, and
then turn on the Digital Piano.
• When using a microphone, adjust the input volume
level with 3 .
• It will take a few seconds after you turn on the Digital Piano
before you will be able to use the microphone.
• Sampled sounds are recorded in monaural.
■ Cutting off power clears sampled data!
If you disconnect the AC adaptor, currently stored sampled
data will be deleted.
7 7 bs bs cl cl 6 6 bt bt
cm cmcn cnco cocp cpcq cqcr cr
3 3
Connection and Preparation
MIC IN jack
Digital Piano AUDIO IN jack
CD player, Cassette player,
etc.
Stereo mini plug