Casio CDP-200R - Manual (Page 24)

Sampling Sounds and Playing Them on the Digital Piano
E-22
Normally when the Digital Piano is in sampling standby, it will
start sampling automatically whenever it detects sound input.
You can use the following procedure to enable manual
sampling start, which will cause sampling to wait until you
press a button to start it. You can use this to insert silence
before the sampled sound.
1.
Press 7 and then use the cl (10-key) [4] ( u)
and [6] ( i) keys to display “SAMPLING” (page
E-6).
2.
Press the cl (10-key) [7] (ENTER) key.
3.
Press the cl (10-key) [–] key to turn off
automatic sampling start.
This enables manual sampling start, which operates as
described below.
• Melody sampling (page E-17):
Sampling starts when you release 6 , which you press
in step 2 of the sampling procedure.
• Drum sampling (page E-19):
Sampling starts when you release the digital piano key
you press in step 4 of the sampling procedure.
• When manual sampling start is enabled, sampling
starts when you release 6 or the keyboard key, not
when you press it. Sampling does not start if you hold
down the button or key.
Normally the Digital Piano will stop sampling automatically
whenever it detects there is no sound input. You can use the
following procedure to enable manual sampling stop, which
will cause sampling to continue until you press a button to
stop it. You can use this to insert silence after the sampled
sound.
1.
Press 7 and then use the cl (10-key) [4] ( u)
and [6] ( i) keys to display “SAMPLING” (page
E-6).
2.
Press the cl (10-key) [7] (ENTER) key.
3.
Press the cl (10-key) [6] ( i) key.
4.
Press the cl (10-key) [–] key to turn off
automatic sampling stop.
Even when there is no sound input from an external
device or microphone, sampling will continue until you
press and release
6 or a keyboard key.
• When manual sampling stop is enabled, sampling
stops when you release 6 or the keyboard key, not
when you press it. Sampling does not stop if you hold
down the button or key.
Other Sampling Functions
Changing to a Manual Sampling Start
S A M P L I N G
Flashes
A u t o S t r t
Changing to Manual Sampling Stop
A u t o S t o p
B